7w/8w high lumen 3 years warranty dimmable COB Led downlights
|Power input||8W± 10%|
|Input Voltage||as driver input |
|Light Source||COB with Epistar chip |
|Beam Angle||25º/40º/60º |
|Luminous Flux(lm)/3000K||616lm± 10%|
|Luminous Flux(lm)/4000K||648lm± 10%|
|Luminous Flux(lm)/5000K||670lm± 10%|
|Working temperature||-10 ~ 50ºC|
|Adjustable direction||30º two directions|
- 7w/8w high lumen 3 years warranty dimmable COB Led downlights.
- High energy efficient, only 10%-15% power consumption of incandescent lamp.
- Environmental friendly, No UV or IR radiation, no noise.
- High CRI more than 85, approximate to the nature light.
- High luminous efficiency over 70lm/w, energy saving.
- Stable luminous, brightness degradation below 1% in 1.5 hours.
- Excellent light spot, comfortable to eyes, no flicker, no strobe.
- Either light is 30º rotative on 2 direction, easy to adjust the light.
- Low decay with 70% lunimous over 30,000 hours, and 30% luminous over 50,000 hours.
- Thick and solid aluminium material, low thermal resistance, good heat dissipation.
- Easy recessed installation. Fix it in the cut hole with the spring bars directly.
- More than 50000 hours lifespan, 20 years life if working six hours per day.
Step1: Turn off all powers, cut out the fitting hole on the ceiling or board.
Step2: Connect switch and input wire of power, then connect and install the light.Step3: Turn on the power and done all the works.
About us Shenzhen Starwire Lighting Co.,Limited is professional manufacturer of LED products, such as LED Strip Light and LED Down Light. Our annual turnover is 10 million US dollars. Now we have 3600 square meter factory and over 100 workers.
Luminous intensity distribution diagram
|Average Ilumination(lx)||1.0M ||2.0M ||3.0M |
SW-CL08-A01 7w/8w COB Led downlight is replpacement for traditional halogen lamp, widely used in hotel, house, office, parking lot, exhibition, club and other places that need indoor lighting.
Notes for safe using
1. Power must be cut off before installation, fix it on the position of installation holes, connection of the power supply must be sealed to prevent electric shock.
2. Please confirm the applicable power supply before using.
3. Operation against rules may damage your property even harm to your personal safety.
Quality is our principle! Welcome to contact us if you have interest.