Mini Crystal LED Strip Connector -Strip to Strip (with wires)
Connector -Strip to Strip (with wires)
About connectors:
Mini Crystal LED strip connector is a transparent PC material connector, mainly suitable for
IP20 COB & SMD strip with matching pads. It has the characteristics of reliable connection,
invisible seamless lighting, perfect solution for aluminum profile application, and DIY
connection without stripping.
Product Advantage:
1.High transparent PC material, good light transmission.
2.Guide slot introduction, anti-shake, more reliable fixed connection
Technical parameter:
5.1 Product parameters
1.
Rated Current: 6A Max
2.
Rated voltage: 5V/9V/12V/18V/24V/36V/48V
3.
Withstand voltage: 500V
4.
Temperature resistance: 105ºC
5.
Working temperature: -20ºC ~ +80ºC
6.
Salt spray test: neutral salt spray 24H
7.
Allowable humidity: 15%~90%
8.
Applicable strip specifications: IP20 SMD & COB strip
The pictures for you reference:
Instruction:
(The picture shows the 2pin operation, refer to this The operation of 3~6pin products is the same.)
Tips:
1.PCB Circuit Laying Rules(
2.Before purchasing connectors, pleaseensure that the led strip meets the following wiring requirements.
3. Customer complaints caused by PCB wiring problems are not covered by the
warranty.)
No.1 copper foil design needs to be laid in a straight line within this range;
No.2 Cut the middle line;
No.3 copper foil center distance design, the center symmetry with the outer width of the light strip is 0.2
Max;
No.4 light strip design thickness 0.30 Max
No.5 lamp beads allow the maximum height, the tolerance range is ±0.2;
No.6 total height after sticking adhesive: 0.55±0.1;
No. 7 Minimum size of lamp bead laying position;
No. 8 Design requirements for the outer width of the light strip; All lamp beads and the outer width of the
lamp strip have a center symmetry of 0.5 Max;
Welcome to get your inquiry.